Samsung SCC-B2313 Manual, Specifications

SCC-B2313/B2315
SCC-B2013P/B2015P
1/3" High Resolution WDR Color Camera
Features
Dimensions 
(
unit:mm
)
• 1/3" Super HAD Progressive CCD
• Day & Night (Moving filter)
• Horizontal resolution : 540(color)/570(B/W) TV Lines
• DNR (Digital Noise Reduction)
• Minimum scene illumination : 0.0005(color)/0.00005(B/W) Lux
• WDR (Wide Dynamic Range) - (SCC-B2313/B2013P is not available)
• 24ea Privacy Zones
• Motion Detection
•2
X D-Zoom
• OSD (On Screen Display)
• RS485 remote control
• AC24V / DC12V (B2013/B2015P : AC220V only)
Specifications
Summary
The SCC-B2313/B2315 is a high resolution color camera equipped with
1/3" Super HAD Progressive scan CCD which delivers excellent Wide
Dynamic Range. It produces sharp images even in harsh lighting condi-
tions that have large contrasts between lightness and darkness.
Imaging Device 1/3" Super-HAD PS CCD, 410K(PAL:470K) pixles
Effective Pixels NTSC : 768(H)x494(V) / PAL : 752(H)x582(V)
Scanning Method 2:1 Interlace
Scanning Horizontal NTSC : 15.750Hz / PAL : 15.625Hz
Line Frequency Vertical NTSC : 60Hz / PAL : 50Hz
Synchronization Method Internal / Line lock (V PHASE control)
Horizontal Color 540 TV Lines
Resolution B/W 570 TV Lines
Signal Output VBS 1.0Vp-p(75 ohm, composite)
S/N Ratio S/N Ratio 50dB
Mount Type C/CS Mount Compatible
Minimum Scene   Color
0.0005(Sens up 256X,15IRE)
Lux
Illumination B/W
0.00005(Sens up 256X,15IRE)
Lux
Functions Privacy Zone Off/On(24EA)
Day & Night DAY/NIGHT/AUTO/EXT
Motion Detection Off/On(4EA)
Wide Dynamic Range
No Yes
D-Zoom Off ~ 2X
High Speed Shutter
Off ~ 1/10K sec
Sens Up Off ~ 256X
BLC  Off/On(Area setting)
AGC Off/Low/High
ELC Off/On(Max.1/100K sec)
Line lock Off/On
Camera ID Off/On
White Balance ATW1/ATW2/AWC/MANUAL
OSD Yes
Alarm Output Yes(1EA)
Remote Control RS485(Half)
Operating Temperature   -10°C ~ 50°C 
Operating Humidity Within 90% RH
Power Requirment AC24V / DC12V compatible 
Power Consumption 3.5W
Weight 410g 
Dimensions 68(W) x 55(H) x 128.7(D)mm
Model SCC-B2313 SCC-B2315
19
NEW PRODUCTS_CAMERAS Video Security System
Specifications
NEW PRODUCTS
CAMERAS MONITORS DVRS NETWORK SECURITY CONTROLLERS
Imaging Device 1/3" Super HAD CCD, 410K(PAL:470K) pixels 
Effective Pixels NTSC : 768(H)x494(V) / PAL : 752(H)x582(V) 
Scanning Method 2:1 Interlace 
Scanning Line Horizontal NTSC : 15.750Hz / PAL : 15.625Hz
Frequency Vertical NTSC : 60Hz / PAL : 50Hz 
Synchronization Method Internal / Line lock 
Horizontal Resolution 540 TV Lines
Signal Output VBS 1.0Vp-p(75 ohm, Composite) 
S/N Ratio 50dB 
Minimum Scene Illumination 0.0009(Sens up 128X,15IRE)Lux
Control Switch Day & Night Off/On 
White Balance ATW/AWC 
ALC / ELC ALC(Video/DC) / ELC(~1/120Ksec) 
Flickerless Off/On 
Line lock Off/On (V-Phase Regulation) 
Input/Output   Image Output BNC
AI Lens 4-pin DIN 
Power Terminal Block (2-pin) 
Operating Temperature -10°C ~ +50°C 
Operating Humidity Maximum 90% RH 
Power Requirment AC24V / DC12V compatible 
Power Consumption 3W 
Weight 440g 
Dimensions 68(W) x 55(H) x 138(D)mm
Model SCC-B2311
18
NEW PRODUCTS_CAMERAS Video Security System
Dimensions 
(
unit:mm
)
Rear
1. Power Connection Terminal :
This is the terminal where a power (adaptor) cable is 
connected.
Connect either AC24V or DC12V for power Requirment.
2. Power LED :
The LED light is turned on if power is being supplied normally to the camera.
3. Vertical Synchronization Phase Control Switch (left) 
: Used when adjusting the vertical synchronization phase.
4. Vertical Synchronization Phase Control Switch (right)
: Used when adjusting the vertical synchronization phase.
5. Function Switch-1 
· 
SW1(L/L) : If set to ‘OFF,’ the camera operates in internal 
synchronization mode and if set to ‘ON,’ it operates 
in power synchronization mode.
· SW2(ELC) : If this switch, selected when using a manual iris 
lens, is switched on, the electronic shutter speed is automatically controlled 
according to screen brightness, in a range of 1/60~1/120,000 exposures 
per second.
· SW3(FL) : This switch triggers the screen–flicker-prevention function in the 50Hz power 
range, preventing the screen flicker that can result from the dissonance of 
vertical synchronization frequency and blink frequency.
· SW4(LSS): This switch triggers the enhanced sensitivity mode, which eliminates image 
noise by consistently accumulating image fields in the memory when images 
are captured in a dark place, and by increasing the brightness and contrast ratio.
6. Function switch-2 
· SW1(AGC) : This switch is used to turn the camera AGC (Auto   
Gain Control) ON/OFF.
· SW2(DNR) : This switch triggers the random noise reduction 
function.
· SW3(D&N) : This refers to the Day & Night.
· SW4(AWB) : If this switch is set to ON, the screen color is automatically adjusted according 
to the temperature change of the lighting color due to changes in the external 
environment.
7. DC IRIS Level Regulator :
When the ALC lens selection switch is set to DC, it regulates 
the iris level by using a control lever.
8. Video Output Terminal : The video signal of the camera can be outputted through this 
terminal to the video input terminal of a monitor.
1. Mount Adaptor Installation Holes : When installing a camera to a bracket, these are 
used when fastening the mount adaptor to the 
bracket with screws.
2. Auto Iris Lens (optional) : This is the lens that can be installed onto a camera.
3. Auto Iris Lens Connector : The power, control signal, video signal and DC signal needed 
to control the lens iris are provided to the auto iris lens.
4. Flange Back Control Ring : This is used for controlling the back focus of camera.
5. ALC Lens Selection Switch :
This is the switch for selecting the type of lens installed 
onto the camera.
6. Control Cable for the Auto Iris Lens :
This transmits the control signal sent by the 
camera to control the lens iris.
7. DC IRIS Level Regulator
6. Function Switch-2
2. Power LED
8. Image Output Port
4. Vertical Synchronization
Phase Control Switch (right)
1. Power Connection Terminal
3. Vertical Synchronization
Phase Control Switch (left)
5. Function Switch-1
Exterior
3. Auto Iris Lens
Connector
1. Mount Adaptor 
Installation Holes
4. Flange Back 
Control Ring
2. Auto Iris Lens
6. Control Cable for the 
Auto Iris Lens
5. ALC Lens Selection
Switch
ON
1. L/L
2. ELC
3. FL
4. LSS
SW1 SW2 SW3 SW4
ON
1. AGC
2. DNR
3. D&N
4. AWB
SW1 SW2 SW3 SW4
*
SCC-B2011P is same as SCC-B2311 except for Power Requirment (AC 220V~240V)
*
SCC-B2013P is same as SCC-B2313 except for Power Requirment (AC 220V~240V)
SCC-B2015P is same as SCC-B2315 except for Power Requirment (AC 220V~240V)
SCC-B2311
SCC-B2011P
SCC-B2313/B2315 SCC-B2013P/B2015P

• 
  Monte Carlo Fan Company 5EG60XX Series

  Monte Carlo Fan Company User Guide Fan 5EG60XX Series (#Z1G32E)

  5EG60XX Series, 5, monte-carlo-fan-company/5eg60xx-series.pdf

• 
  GE 00009246

  Telephone Handbook #UWNJ22

  00009246, 96, ge/00009246.pdf

• 
  Nilfisk-ALTO SCRUBTEC 343B

  User Manual (SCRUBTEC 343B, #25MKU5)

  SCRUBTEC 343B, 92, nilfisk-alto/scrubtec-343b.pdf

• 
  Brother HL-2035

  Brother Guidance: HL-2035 (#MK33PK)

  HL-2035, 93, brother/hl-2035.pdf

• 
  Hamilton Beach OG02

  #R59A54: OG02 Guidance

  OG02, 35, hamilton-beach/og02.pdf

• 
  Indesit D 63

  D 63 Door - #NH866N

  D 63, 11, indesit/d-63.pdf

• 
  Pioneer KEX-M8006ZT/UC

  Pioneer Guide: KEX-M8006ZT/UC (#HJLG26)

  KEX-M8006ZT/UC, 64, pioneer/kex-m8006ztuc.pdf

• 
  Mecerr ME-650-VU

  #DF9N6Q: ME-650-VU User Manual

  ME-650-VU, 2, mecerr/me-650-vu.pdf

• 
  QSC SR-26

  #613619: SR-26 Reference Book

  SR-26, 10, qsc/sr-26.pdf

• 
  Maytag NEPTUNE MAH550

  Maytag Washer Manual (#85852O)

  NEPTUNE MAH550, 17, maytag/neptune-mah550.pdf

• Search YouTube Videos for Samsung SCC-B2313 Device
• Search Google for Samsung SCC-B2313 Information
• Search Photo of Samsung SCC-B2313 in Google Images
• Search Twitter for Samsung SCC-B2313 News