Foxconn 661MXPlus Easy Installation Manual

5, 5 Plug the CPU cooling fan cable into the 3-pin CPU FAN power supply on the motherboard. Connect the case cooling fan connector to FAN1. 4. Front Audio Connector The audio interface provides two kinds of audio output choices: the Front Audio, the Rear Audio. Their priority is sequenced fro…

2, Foxconn 661MXPlus 2 Serial Port (COM1) PS/2 Mouse Connector Parallel Port (Printer Port) Line-in jack Line-out jack Microphone jack 1 4 8 PS/2 Keyboard Connector 3 2 LAN Port (optional) 7 VGA Port (optional) 5 USB 2.0 Ports6 661MXPlus Rear Panel PS/2 Mouse Connector This green 6-pin connector is for a PS/2 m…

8, 8 The F-USB 1/2 connectors are available for additional USB ports if the USB ports on the rear panel are inadequate. Compared to traditional USB 1.1 with the speed of 12Mb/s, USB 2.0 has a fancy speed up to 480Mb/s, which allows faster Internet connection, interactive gaming, and simultaneous run…

10, 10 This motherboard comes with one Utility CD. To begin using the CD, simply insert the CD disc into the CD-ROM drive. The CD will automatically bring up the main menu screen. Click “Install Driver”, then click the relevant buttons to install the IDE Driver, AGP Driver, VGA Dr…

4, 4 You can clear CMOS to restore default system setting. To clear the CMOS, follow the procedures described below. 1. Turn off the system and unplug the AC power. 2. Remove ATX power cable from PWR1 connector. 3. Short pins 1 and 2 on this jumper. 4. Return the jumper to the normal setting by…

6, 6 CD_IN is Sony standard CD audio connector, it can be connected to a CD-ROM drive through a CD audio cable. 5. CD_IN Connector Attach the power LED, IDE LED, reset switch and power switch connectors to the corresponding pins. 6. Front Panel Connector FP1 PWR-LED HDD_LED PWRSW - + …