Foxconn A7DA-S Operation & User’s Manual

24, 2 17 Fan Headers : CPU_FAN, SYS_FAN, NB_FAN There are three main fan headers on this moth- erboard. The fan speed can be controlled and monitored in “PC Health Status” section of the BIOS Setup. These fans can be automatically turned off after the system ente…

96, 5 89 Create RAID 10 (Striped Mirror) Here, we will show you how to create one Striped Mirror Logical Drives (LD) by using four hard disks. 1. Select [2] from the main menu, "Dene LD Menu" appears. 2. Press [Enter], the screen appears as below. 3. Use [↓] key to select the hard …

97, 5 90 5. A message prompts. Press [Ctrl-Y] to erase the RAID array. 6. Another screen prompts. Press any key to use the maximum capacity. 7. The selection of LD1 array is completed. The nal capacity of 164.56GB (82.28GB*2) is twice capacities of the smallest size of the four hard drives. …

63, Foxconn A7DA-S 4 56 You can see the system is raising CPU clock until the system hangs. Push RESET button on the front panel of your system to restart the computer. Run FOX ONE program again, it will inform you the previous test found that 255MHz is the recommended CPU clock for your system. Click Y…

55, 4 48 Utility CD content This motherboard comes with one Utility CD. You can simply put it into your CD/DVD-ROM drive, and the main menu will be displayed on your PC screen to guide you how to install. 1. Install Driver Use these options to install all the drivers for your system. You s…

29, 3 22 ► Power Management Setup All the items related with Green function features can be set up through this menu. ► PC Health Status This setup enables you to read/change Fan speeds, and displays temperatures and voltages of your CPU/System. ► BIOS Security Features The Supervis…