Foxconn BLACKOPS Operation & User’s Manual

84, 77 5 1. Find another PC, put a diskette into its oppy drive, this diskette will be formatted later. Put the BLACKOPS driver CD into CD-ROM drive, the screen will come out. Click on "Create RAID Driver Floppy" icon. 2. Depending on each platform of your XP system, normally, it is a…

36, Foxconn BLACKOPS 29 3 Standard CMOS Features This submenu is used to set up the standard BIOS features, such as the date, time, oppy drive and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change the setting. ► Date - <weekday><month>…

67, 60 4 4. ALARM Click "ALARM" button to trigger the warning events. It allows you to set the low/high limits of the monitoring sensors. You can select a particular sensor to be watched carefully, or choose them all. If the monitoring value is lower than the low limit or…

18, 11 2 Install the CPU Cooler Follow the steps below to correctly install the CPU cooler on the motherboard. (The following procedures use Foxconn cooler as the example.) 1. Apply and spread an even thermal grease on the surface of CPU. 2. Place the four bolts of t…

6, TABLE OF CONTENTS Chapter 1 Product Introduction Package ListPackage List ..................................................................................................2 Product Specications ...................................................................................3 Lay…

60, The utility CD that came with the motherboard contains useful software and several utility drivers that enhance the motherboard features. This chapter includes the following information : ■ Utility CD Introduction ■ AEGIS PANEL ■ FOX LiveUpdate ■ FOX D…