Data: UPD 9th October 2023
Freedom9 X10P Network Card PDF Specifications (Updated: Monday 9th of October 2023 03:35:15 AM)
Rating: 4.3 (rated by 79 users)
Compatible devices: Network Device Altos R520, RMCARD305, Braking Modules VFDB Series, Xeta Half Brick-iHG, HZ1500, DX-EBUSB, OPENconnectors Command Line Interace, Network Board MD13NET.
Recommended Documentation:
Text Version of Freedom9 X10P Network Card Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 09 October 2023)
freeView X10P
KVM Console Extender
freeView X10P > KVM Console Extender
Specifications
The freeView X10P is a CAT 5 extender designed to control a
PC or KVM Switch from up to 500 feet away from your
keyboard, mouse and monitor. The freeView X10P transmitter
converts the signals from PS/2 and VGA to signals that travel
on CAT 5 cable allowing them to be transmitted over a long
distance to the freeView X10P receiver. The receiver converts
the signal back to PS/2 and VGA.
The freeView X10P facilitates the control of devices from afar.
It is an excellent solution for secure server rooms with
restricted access, and also to allow staff to work outside of
noisy server rooms.
Using the freeView X10P, the receiver and transmitter will
allow you greater freedom in where you locate your desk while
still allowing you to access remote servers.
Local Console Connections
Keyboard/Mouse
Keyboard/Mouse
Video
PS/2
LAN Port
VGA
Model Numbers
Model Name freeView X10P
Description KVM Console Extender
Part Number KEX-150P
Revision 2.0 Specifications are subject to change without notice. Copyright 2008 Freedom9 Inc.
• Compact desktop size
• Works with single PC or a KVM Switch
• Easy to install
• Supports CAT 5, CAT 5e, or CAT 6 Ethernet
cables
• Supports standard 3-in-1 KVM Switch cables
• Range from remote computer is up to
500 feet
• No software required
• Compatible with DOS, MS Windows, Linux,
Unix, and Novell
www.freedom9.com
1-888-998-9189
Video
Host Connections
PS/2
VGA
VGA
PS/2
Features:
LED indicators Power, Data
VGA Resolution 1280 x 1024
Power Supply --
300ft segment DIP switch 1
Dimensions (L x W x H) 4.4 x 3.0 x 1.4 in
(111.5 x 75 x 35.5 mm)
Model Number KEX-150PT (Transmitter) KEX-150PR (Receiver)
PS/2
VGA
RJ-45
PC1, PC2
RJ-45
Dial for VGA tuning --
1
1280 x 1024
DC 12V, 1A
--
4.6 x 3.1 x 1.6 in
(117 x 80 x 39.5 mm)
Recommended:
GT0621F-1000, FFU20FC6AW3, EG-2990i, BridgeVIEW
kt-100, SI-EM3, S5-135U/155U, WLI-CB-G54HP, TEG-PCISXplus, TDIF-Interface mit 24Bit/96kHz Analog and Digital i/O Delta TDIF
-
2.5” Hard Disk Drive Installation Notes - 9.5mm Series P/N 480040-G0 P/N 480040-G0 2.5” Hard Disk Drive Installation Notes - 9.5mm Series8/01 8/01CABLING INFORMATIONDRIVE INTERFACE SIGNALSPIN SIGNAL PIN SIGNAL1 -RESET 2 GROUND3 DD 7 4 DD 85 DD 6 6 DD 97 DD 5 8 DD 109 DD 4 10 ...
Model & Doc Type: MK1517GAP 4
-
GUC1284B Quick Start GuideRead this guide thoroughly and follow the installation and operation procedures carefully to prevent any damage to the unit and/or any devices it connects to:This package contains:• 1 IOGEAR USB to Parallel Printer Cable • 1 Quick Start Guide • 1 ...
Model & Doc Type: USB Paralell Printer Cable GUC1284B GUC1284B GUC1284B 1
-
When your network calls for a speed upgrade, placing a NETGEAR GA621Fiber Gigabit Ethernet Card in the server does the trick quickly.The highperformance card provides serious throughput with a 64-bit PCI bus andspeeds up legacy systems with 32-bit PCI capacity. Plug-and-play installationmakes i ...
Model & Doc Type: GA621 2
-
WET11Included with the Linksys WET11 WirelessEthernet Workgroup Bridge• Linksys Instant Wireless™ Wireless EthernetWorkgroup Bridge (1)• One External Antenna (attached)• One Power Adapter (2)• One UTP Category 5 Cable (3)• One Setup CD-ROM with User Guide (4)• Quick Installation and ...
Model & Doc Type: WET11 - Instant Wireless EN Bridge Network Converter 2
Operating Impressions, Questions and Answers:
