Triumph Adler DC 2015 Instruction Handbook Manual

2, As an ENERGY STAR Partner, UTAX GmbH, a company of TA Triumph - Adler AG, has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The ENERGY STAR program is an energy reduction plan introduced by the United States Environmental Protection Agency in response …

13, CHAPTER 2 NAMES OF PARTS 2-4 · Layout key/2 in 1 indicator/4 in 1 indicator (Press to copy multiple images on the same face of the copy. See page 5-2.) ‚ Margin key (Indicator) (Press to create margins. See page 5-1.) Œ Border Erase key (Indicator) (Press to erase blemishes from the edges of co…

22, CHAPTER 4 BASIC OPERATIONS 4-3 1 2 3 1 2 3 2. Enlargement/reduction (1) Auto magnification selection mode The original image is enlarged/reduced automatically according to the selected paper size. Check that the AMS indicator is lit. If not, press the auto mode selection key to light the ind…

44, 8-1 3-5 3-5 3-5 7-3 CHAPTER 8 WHEN A PROBLEM OCCURS 1. Error display When any of the indications listed in the table below appears on the operation panel, take the corrective action as instructed. “C” and a number alternate on the copy quantity display. Turn the main switch ON and OFF. If th…

35, Triumph Adler DC 2015 CHAPTER 6 COPIER MANAGEMENT 6-4 The state the copier is in at the end of warm-up or when the Reset key is pressed is called the initial mode, and the function settings that are automatically set for the initial mode are called the default settings. The default settings can be changed accor…

12, CHAPTER 2 NAMES OF PARTS 2-3 (2) Operation panel 1 Start key (Indicator) (Press to start copying. Copying is possible when the indicator is lit green.) 2 Stop/Clear key (Press to change the settings or number of copies to be made.) 3 Numeric keys (Press to set the number of copies or enter the…