Troy-Bilt 830 Series Operator's Manual

3, 3 1 Slope Gauge WARNING Do not mow on inclines with a slope in excess of 15 degrees (a rise of approximately 2-1/2 feet every 10 feet). Operate WALK-BEHIND mowers across the face of slopes, never up and down slopes. 3IGHTANDHOLDTHISLEVELWITHAVERTICAL�…

1, Safety • Assembly • Operation • Tips & Techniques • Maintenance • Troubleshooting • Parts Lists • Warranty Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush- covered or grass-covered land unless…

20, MANUFACTURER’S LIMITED WARRANTY FOR GDOC-100020 REV. A The limited warranty set forth below is given by Troy-Bilt LLC with respect to new merchandise purchased and used in the United States and/or its territories and possessions, and by MTD Products Limited with respect to new merchand…

12, 12 5 Maintaining Your Lawn Mower WARNING 7. Replace with new belt, working it between the deck and baffle, first around the transmission pulley and then the engine pulley. NOTE: Make certain that belt is seated correctly and that it is riding smoothly on the engine pulley and is not…

6, 6 3 Setup and Adjustment 1. Remove any packing material which may be between upper and lower handles. a. Pull up and back on upper handle as shown in Figure 3-1. Do not crimp cable while lifting the handle up. Remove star knobs from handle mount- ing brackets and secure the …

11, Troy-Bilt 830 Series 11 Blade Care WARNING: When removing cutting blade for sharpening or replacement, protect your hands with a pair of heavy gloves or use a heavy rag to hold blade. 1. Disconnect spark plug wire from spark plug. Turn mower on its side making sure that the air filter and the carburet…