Xantech DL85K Installation Instructions Manual

8, 14 Limited Warranty Xantech® warrants its products to be free of defects in materials or workmanship. This is a Limited Lifetime warranty from the date of purchase by the original consumer. Any products returned to Xantech and found to be defective by Xantech within the war…

5, 8 IR Troubleshooting Guide NOTE: Due to the many variables in a given installation, the troubleshooting countermeasures you will have to take may vary from job to job. Each installation is different due to the number of IR receivers in use, length of wire runs, type of wir…

4, 6 ITEM C: (4) 283D Designer Emitters ITEM D: (1) 781ERGPS Power Supply STEP 1: Plug in the 2.1mm Coaxial power plug of the 781ERGPS Power Supply (ITEM D) into the jack labeled 12VDC on the 789-44 Connecting Block (ITEM B). Plug the AC end of the 781ERGPS Power Supply (ITE…

6, 10 Symptom #3: TB LED on IR Receiver (and/or Emitters) on solid Cause: Solution 1. Plasma Interference Use a 85 or 95 series Plasma 'Friendly' Receiver. If already using a this unit, please note the Plasma interference can be reflected off of any item it comes in…

7, Xantech DL85K 12 Symptom 6: Emitters function but some (or all) components do not respond. Cause: Solution 1. Emitter placement is incorrect. Reposition the Emitter so that it is directly over the components sensor window. Consult the components owners’ manual of the unit for t…

1, INSTALLATION INSTRUCTIONS DL85K Dinky Link™ Surface Mount Plasma\LCD\LED\CFL Friendly IR Receiver 1 DESCRIPTION These small IR receivers have been designed for mounting in very small spaces. They may be mounted under shelf edges, cabin…