TYAN NVRAID Manual 

71, NVIDIA Corporation 67 C HAPTER 3 Using the NVRAIDMAN Utility 5 Click Next and the following screen shot will appear: Figure 3.47 Free Disk Selection Page 6 Select the two drives that you want to use in the Spanned array. In this example the upper two disks were selected as shown…

53, NVIDIA Corporation 49 C HAPTER 3 Using the NVRAIDMAN Utility 4 Click Next. The Disk Selection page appears. Figure 3.17 Disk Selection Page 5 Select the drive that you want to rebuild by clicking it from the list, then click Next. The Completing the NVIDIA Rebuild Array page app…

65, NVIDIA Corporation 61 C HAPTER 3 Using the NVRAIDMAN Utility Creating a Stripe Mirroring Array NVRAIDMAN can be used to create a Stripe Mirroring array which requires at least four disks to start such an array. To create a Stripe Mirror Array do the following: 1 Go to the system BIOS and…

80, TYAN NVRAID 76 NVIDIA RAID User’s Guide – Version 2.0 A C HAPTER 3 Using the NVRAIDMAN Utility 5 Click Next and the following screen shot will appear: Figure 3.58 RAID Mode Selection Page 6 Click Next and the following screen shot will appear: Figure 3.59 Free Disk Selection Page …

11, NVIDIA Corporation 7 C HAPTER 1 About NVIDIA RAID Spanning (JBOD) How JBOD Works JBOD stands for “Just a Bunch of Disks”. Each drive is accessed as if it were on a standard SCSI host bus adapter. This is useful when a single drive configuration is needed, but it offers no spe…

99, NVIDIA Corporation 95 C HAPTER 3 Using the NVRAIDMAN Utility 7 Click Next and the following screen shot will appear: Figure 3.88 Free Disk Selection Page 8 Select both of the disks and click Next, then click Finish. 9 Click on Stripe Mirroring and the following screen shot will appear:…