Sangean WR-2 Operating Instructions Manual

4, 3 Controls Light button Radio band Memory presets Power On/Off/Sleep button Rotary Tuning Control Volume/Tone control Trafc information button and minute adjustment Auto time button and hour adjustment Alterative frequency and Select button Set button Station search and mono button Earp…

12, 11 FM Stereo/Mono button 1. If a station being received is weak , some hiss may be audible. To reduce the hiss, press and hold down Mono button until radio beeps and display shows MONO. 2. Press and hold down the Mono button to return to Stereo operation. 3. FM stereo…

7, Sangean WR-2 6 GB Power your radio AC operation Before you plug the AC cord into the radio, be sure the AC voltage is correct. Insert the plug on the end of the supplied power cord into the AC power socket on the back of the radio . DC operation For outdoors use, you can power the radio…

19, 18 GB Specications Frequency Coverage: FM 87.50 – 108 MHz AM 520 – 1710 kHz (10 kHz version) or MW 522 – 1629 kHz (9 kHz version) Powered: AC 120V/60Hz/24W Internal Antenna system: AM built-in ferrite antenna FM built-in wire antenna External antenna terminal: AM …

8, 7 Clock Setting 1. When radio power is off, long press SET button until display ashes “ AM 12:00” or “0:00” depending on the sales areas. 2. Press and release Hour and Minute button or rotary tuning control button to set the required clock time. 3. Press SET but…

16, 15 Alternative Frequency (AF) The RDS system provides a list of alternative frequencies for the station you are tuned to. 1. Switch on your radio and select the FM waveband. Tune into a station carrying RDS information. 2. Press the AF button, your radio will scan the list of alt…