Q-See QC818 Operation & User’s Manual

13, 24 25 ADDING AND REMOVING CAMERAS IN YOUR DISPLAY As stated earlier, your NVR will automatically show video from cameras connected to it directly through the POE Block as they are connected - assigning them to channels sequentially regardless of which port is used to connect them. Cameras sharin…

44, 8786 Parameter QC804 QC808 QC8016 Control Mode Front panel, USB mouse, IR remote control, Keyboard, Network Compression Compression Format H.264 and MPEG-4 dual codec Video Video In 4 channel input directly through POE block 4 additional channels through network 12 additional channels…

9, 16 17 QC828 Front Panel ESCFNRECSHIFT ENTER POWERHDD1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 NET QC828 NVR 8 Channels 1 2 7 8 9 10 11 1312 14 3 4 65 Number Item Function 1 Channel Status Lights These lights will illuminate to indicate that a particular channel is recording. 2 Status Lights N…

32, Q-See QC818 62 63 EDIT Double-clicking on a device in the Device Added portion of the window will display information regarding the connected remote device. Making any changes within this window will not change anything on the camera or remote device itself. To make those changes, you will need t…

21, 40 41 PICTURE 3-26 3.5 SEARCH AND PLAYBACK The Search and Playback window can be accessed through the Shortcut menu. You can view the playback from any camera that was activated during the recording session. You are also able to view the playback from multiple cameras simultaneously. As …

7, 12 13 1 2 QC814 Front Panel QC824 Front Panel Number Item Function 1 Status Lights These show the status of the network connection, power and hard drive respectively. The Network and Power lights will normally be on. The Hard Drive light will normally be off. 2 USB Port For use wi…