Q-See QT17DVR4C Quick Installation Manual

1, Q-See QT17DVR4C 4 CH DVR Quick Installation Guide MODEL QT17DVR4C Version: 6214C-P01.010 Package Contents: 1. 1-17" TFT w/built-in 4 Channel MPEG4 DVR 2. 4 - CCD Outdoor Night Vision Cameras 3. 1- Remote control 4. 1- Power Cable 5. 4- BNC Cables (60 foot) 6. 1- USB cable 7. 1- VGA…

5, To Set Up Time Schedule Recording: Use the Remote Control and push SETUP and follow the instruction below: 1. Select "Work Set" using the directional arrows and hit ENTER. 2. Use the directional arrows to select "Setup" and hit ENTER 3. Select the first heading un…

7, To Back Up the files: You can use the USB cable and connect it directly from DVR to USB port on the PC and either copy it your PC hard drive or play it back on your PC 1. Push SETUP on the romote control Use the directional arrows to select "Basic Set". 2. Use the direct…

4, To Record With Your DVR : There are 3 modes for recording. 1. Manual recording: Push the RECORD button. It will record all the time until you stop it by pushing the RECORD button again. 2. Motion Detection Recording: This will record only when there is a Motion in front of the camera. 3. Time Sc…

2, Installation: 1. Attach the camera to the BNC connector and the power connection. Line up the slots on the yellow BNC connector (1) with the tabs on the grey connector(2), then push in and turn the head on the yellow connector clockwise to lock it in place. Push the red connector (1) with …