SEAL 44/62 Ultra Plus Operation & User’s Manual

18, 5 PROCESS CONTROL SHEET Pressure Sensitive Thermal Application Unwind Recommended SEAL products Speed Unwind Recommended SEAL products Speed Temp top Print Shield top Print Guard UV/Jetguard 195 F / 90 C Rigid Display bottom Print Mount 2 - 4ft/min (0.6 - 1.2m/min) bot…

35, SEAL 44/62 Ultra Plus Index 33 English 11 INDEX A Application Processes .....................17 B Board Thickness ................................5 C Cleaning...........................................29 D Dimensions ........................................5 E Environment Conditions...............…

17, Unit description 15 English 4.3 Unwind brakes Tighten the supply brake so that it applies sufficient tension to laminate. Turning the knurled collar in a clockwise direction increases the breaking tension applied on the laminate. Turning the collar counter-clockwise decreases the …

27, Application Processes 25 English 6.7 Encapsulating This process involves completely sealing an image between two heat-activated films. Once the machine reaches the operating temperature, the laminator may be stopped, the top roller raised and webbed as per the following photographs and…

31, Maintenance & Cleaning 29 English 7 MAINTENANCE & CLEANING Cleaning of the Machine The equipment must be disconnected from the mains before cleaning. The laminator may be cleaned by the operator with a lint-free cloth, lightly dampen with a mild soap and water solution. Spr…

2, English All rights reserved All information included in this manual as well as information included in supplements or addendum to this manual is subject to copyright law. This information shall not be used, copied, reproduced, transmitted or disclosed to third parties without our pri…