Quatech QSCLP-200 Operation & User’s Manual

15, 4.4 Windows 1995 Windows 95 maintains a registry of all known hardware installed in your computer. Inside this hardware registry Windows 95 keeps track of all of your system resources, such as I/O locations, IRQ levels, and DMA channels. The "Add New Hardware Wizard" utility in Window…

13, Quatech QSCLP-200 4.3 Windows 98 1. After inserting a QSC(LP)-200/300 for the first time, the "Add New Hardware Wizard will appear at start up. Click the "Next" button. 2. Select "Search for the best driver for you device". Click the "Next" button. 3. On the next dialog, sel…

30, 6.9 RS-422/485 Peripheral Connection The QSC(LP)-200/300 connects to peripheral equipment through four male D-9 connectors. The serial port connector definitions are listed in Figure 10. 3GND 9AUXIN- 5AUXIN+ 6AUXOUT- 1AUXOUT+ 8RxD- 4RxD+ 7TxD- 2TxD+ D-9 Connector PinSignalDescription…

28, 6.7 Termination Resistors No termination resistors are provided on the ports. Both output and input signals are connected only to the external connector. Any termination which is required must be added externally. + - RS-422/485 Receiver Rt RXD+ RXD- + - RS-422/485 Receiver Rt AUX…

20, The X8 clock mode locks the ports hardware clock at eight times the standard rate. The baud rate the port runs at will always be eight times the rate requested by the application. This mode is useful for legacy applications which cannot request baud rates over 115.200. 921,600X8 The X…

32, 8 Specifications Bus interface: PCI, 32-bit bus, Universal Signalling Voltage IBM-compatible computers Dimensions: approx. 4.725" x 2.5" Serial ports Controller: 16750 with 64-byte FIFOs Interface: Custom cable to four female D-9 connectors Transceivers: MAX-3076E or compatible Dif…