Data: UPD 13th October 2023
Quatech SS-BLT-100 Adapter PDF Quick Installation Manual (Updated: Friday 13th of October 2023 11:59:06 PM)
Rating: 4.6 (rated by 31 users)
Compatible devices: ESU-100-EMB, QSP-100, Asynchronous Communications Adapter QSCLP-100, SPPXP-100, DSC-300, HS-PCI-100, CP-ESCLP-D25, Asynchronous Communications Adapter DSC-200/300.
Recommended Documentation:
Text Version of Quatech SS-BLT-100 Adapter Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 13 October 2023)
Bluetooth To Rs-232 Quick Installation Guide
1. The converter plug power adapter and connect to pc com 1 (Com port Selectable).
2. Run the BT1 program ( BT RS232 Config Tool V 1.00 ).
3. Press the right top connect button of the BT RS232 Tool and press the near side
button of the Bluetooth converter then get into set up mode.
4. When the left under read button turn into black color. It becomes set up mode ok.
5. Press the read button of the BT Tool. You can read converter default parameters.
6. Change the parameters information then press right under write button of the BT Tool.
You can save the parameters information into Bluetooth converter.
7. Trun off the power of converter , close the BT Tool program and then turn on the
converter again. If pair connect each other ok ( the green LED will light all the time )
then Bluetooth converter enter transmit data mode.
8. If converter can not pair , Press the near side button of Bluetooth converter for pairing ,
if pairing ok , the converter get into transmit data mode.
9. After become transmit data mode, the red and green light will light all the time.
DSUB-9 PIN definition
Pin 1> NC Pin 6> DTR (data output)
Pin 2> TXD (data output) Pin 7> CTS (data input)
Pin 3> RXD (data input) Pin 8> RTS (data output)
Pin 4> DSR (data input) Pin 9> DC 5v power (in)
Pin 5> GND Default Value : 9600,N,8,1
Remark : RX / TX had been CROSS OVER PIN code :1234
Recommended:
LTC20380ST, JWL-1840EVS, CKSTSKSH14, 917.389380
DX-DRTVL103, CM-1S, 2000-100000, SAA04-05224A, DHP-310AV
-
HPE StoreFabric CN1100R Dual Port Converged Network Adapter User Guide Abstract This document is for the person who installs, administers, and troubleshoots servers and storage systems. Hewlett Packard Enterprise assumes you are qualified in the servicing of computer equipment and trained in r ...
Model & Doc Type: StoreFabric CN1100R 32
-
Allied Telesis www.alliedtelesis.comDatasheet | Network Interface CardsAT-2701FTXPCI 32-bit Fast Ethernet Fiber Network Interface CardAT-2701FTX100Mbps Fast Ethernet dual fiber and copper 100TX interface cardChoice and FlexibilityAllied Telesis’ AT-2701FTX is the answer forthose fiber in ...
Model & Doc Type: AT-2701FTX 2
-
品番(PART NUMBER)適合(APPLICATION)日本語 **************2pEnglish **************3p●この取扱説明書を良く読んでからお使いください●日産自動車の発行する整備要領書と併せてお使いください●取り付け後も大切に保管してくださ� ...
Model & Doc Type: R13 4
-
* TL-PA4010 KIT (European version) is used for demonstration in this QIG.Router1600MbpsAdapterTL-PA401023600MbpsAdapterTL-PA4010600Mbps6More: To add additional Powerline adapters and extenders with the default settings, simply plug them into the wall sockets on the same electrical circuit ...
Model & Doc Type: TL-PA4010 2
Operating Impressions, Questions and Answers:
