Quatech DSPXP-100 Operation & User’s Manual

8, Installing the software Quatech ExpressCard Serial Adapter User’s Manual Figure 3 - Windows XP “software has not passed Windows logo testing” prompt Step Procedure Description  Step 8 In the case of a new unsigned driver, the “software has not passed Windows log…

2, Copyright Copyright © 1998 - 2007, Quatech, Inc. All rights are reserved. The information contained in this document cannot be reproduced in any form without the written consent of Quatech, Inc. Any software programs that might accompany this document can be used only in accordance with any…

6, Quatech DSPXP-100 Installing the software Quatech ExpressCard Serial Adapter User’s Manual Installing the Serial Adapter This section explains how to install the Serial Adapter under different operating systems. Please locate and follow the procedure for your computer’s operating system. Cautio…

20, Using configuration utilities Quatech ExpressCard Serial Adapter User’s Manual Using Device Manager This section explains how to use Device Manager to view the properties of the serial ports enumerated by the Serial Adapter. Accessing Device Manager Step Procedure Description  Step…

31, Quatech ExpressCard Serial Adapter User’s Manual Using configuration utilities Receiver Control (RS-422/485 adapters only) In RS-422/485 half-duplex operating modes, the serial port’s receivers can be set to be active all the time or to be active only when the port is not transmi…

10, Installing the software Quatech ExpressCard Serial Adapter User’s Manual Uninstalling under Windows XP Follow these steps in the event that you need to uninstall or reinstall the Serial software. 1. From the Control Panel, select System. 2. Press the Hardware tab. 3. Click on Devi…