Quatech SS-BLT-400 Operation Manual

9, 8 Follow the parameter setup procedures to configure the converter (see the following chapters). Terminator The purpose is for compensating signal attenuation in long distance connection at RS-485/RS-422 I/O. If the switch 1 & 2 are set in “ON” position, the signal compensa…

8, 7 Antenna Connector The antenna is a standard SMA jack. Simply connect it to a 2.0dBi dipole antenna (Standard Rubber Duck) and it is 50 Ohms impedance and can support 2.4GHz frequency. Serial I/O Port Serial I/O Port of RS232&RS422/485 Connect the serial data cable between…

6, 5  Environment : Operating Temperature: 0℃～60℃ Storage Temperature : -25℃～70℃  Dimensions : 90 * 65 * 27 mm ( W * D * H )  WEIGHT : 200 gm  Regulatory Approvals : EMC : FCC Class A, CE Class A WARRANTY : 1 year RoHS …

11, Quatech SS-BLT-400 10 5 5 Hardware Installation 1. Connect this Bluetooth To Serial Converter to COM Port of PC and then to connect DC power adapter and jack into power outlet and DC-in outlet. You will see the red LED is going to be on and the green LCD will be blink. 2. After r…

10, 9 LED Indicators SYS (Red)： It is the power indicator, when the power is on then the LED will blink once per second. Pair (Green)： Before connecting to synchronize between the device and the “BT RS232 Config Tool” software, the green LED will be blinking After c…