Quatech AirborneDirect Quick Start Manual

3, 4. Make the Access Point Connections Place the Access Point in close proximity to the Serial Bridge. Follow the directions in the Access Point manual to install the network cable (to the LAN Host) and the power cable for the Access Point. For initial configuration, the security on Access Point m…

7, Quatech AirborneDirect 10. Where to Go from Here After you verify that the LAN host, Serial Bridge, and Access Point are communicating, you are ready to access the full Wi-Fi power of the AirborneDirect ™ Serial Bridge and tap into your wireless local area network. The supplied CD contains the AirborneDirec…

2, Getting Started Quickly The AirborneDirect Serial Bridge is shipped ready-to-use. Follow these quick steps to set up the Serial Bridge 1. Unpack the Evaluation Kit Unpack the AirborneDirect Serial Bridge and compare the package contents with the items listed on the front of this Quick Start Gu…

5, 7. Record Settings from Your Access Point’s Configuration Program On the LAN host, use your Web browser to log into your Access Point’s online configuration program at the appropriate IP address (for example: http://192.168.0.1 ). Your Access Point documentation provides this procedu…

6, 8. Configure the Serial Bridge using the Airborne Configuration Center On the LAN host, launch the Airborne Configuration Center (ACC). An icon to launch the ACC will be found in your Windows Start menu if you properly installed the software as directed in Step 3. The ACC’s initial…

4, 6. Power Up the Serial Bridge Use the supplied power adapter to connect the Serial Bridge to a power outlet. When the Serial Bridge is powered up, the three indicator LEDs at the top of the Serial Bridge will indicate the status of the Serial Bridge. LED LED Color Function Off Serial Brid…