Quatech USBN-500NAS Operation & User’s Manual

19, Select Partition: Select the partition which you want to access with the given share name. • Comment: Comments that you want to give for a share (optional setting) • Validusers: Give the users separated with commas who are authorized to access this share. If no user is listed…

22, refresh time interval. The “Active Connections” will display the IP addresses and the PC names that have connected to the NAS box. In the “Kill” column you can close a connection by clicking “X” mark. But the client can re-establish the connection. The “Active Shar…

3, 1. Introduction: The NAS USB-IP Combo solution not only allows you to add storage space onto your home or office network but also allows you to work with the remote USB devices over a local network as if they were connected directly to your local PC. Key Features of…

23, The status page displays the current status of the USB devices attached. • Device Status: • Vendor Id • Product Id • Class Id • Peer-ip address • Status This status page is updated automatically every 10 seconds and it shows the…

8, The USB Device Server search is password protected and should be unlocked in order to configure the selected device. On selecting ‘Un-Lock’ the password dialog pops up as shown below. Key in the password in the ‘Password’ dialog. The default password for the USB IP Serve…

12, Quatech USBN-500NAS option to upgrade the firmware. Select the file to be upgraded by click on the Browse option in the “Select File” dialog as shown below. A upgrade.tar.bz2 file is required to upgrade the firmware. The upgrade .tar file can be downloaded from our website. Click on “Tr…