FUNAI MFV209C Owner's Manual

7, – 7 – Panel frontal CONTROLES DE FUNCIONAMIENTO Y FUNCIONES Panel trasero Mando a distancia INSTRUCCIONES EN ESPAÑOL STOP/EJECT POWER POWER REPEAT PLAY REPEAT PLAY REW PLAY PICTURE SELECT F.FWD 9 126 8 7 1110 3 5 4 POWER TRACKING DISPLAY REW PLAY STOP F.FWD EJECT COUNTER RESET PICTURE SELECT…

5, – 5 – EN 1 Insert the prerecorded tape. The VCP will turn on. If the safety tab has been removed, the VCP will start playback automatically. 2 Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCP to match the channel selected on the TV. 3 Be…

2, – 2 – EN INSTALL LOCATION For safety and optimum performance of your VCP: • Install the VCP in a horizontal and stable position. Do not place anything directly on top of the VCP. Do not place the VCP directly on top of the TV. • Shield it from direct sunlight and keep it a…

4, – 4 – EN 1) Connect one end of the DC cable to the 13.2 VOLT (12V) DC connector on the back of the VCP. 2) Connect the other end of the DC cable to your vehicle’s cigarette lighter socket. WARNING: The driver should never watch a video program while operating a motor vehicle. CAUTION: A…

6, FUNAI MFV209C – 6 – EN Operating temperature : 5°C~40°C (41°F~104°F) Converter output : VHF Channel 3 or 4. Power requirement : AC120V, 60Hz DC13.2V (12V) Power consumption : AC12W DC10W Dimensions : W 11” (280mm) H 3-5/8” (92mm) D 9-13/16” (250mm) Weight : 4.4 lbs. (2.0 Kg.) (approx.) SERVICING…

3, 0:12:34 PLAY MODE REWIND MODE FAST FORWARD MODE EJECT MODE STOP MODE 0:12:34 0:12:34 <OFF mode> <STATUS mode> <COUNTER mode> 5 SECONDS Press once Press once – 3 – EN 1. POWER button 2. DISPLAY button 3. REW button 4. STOP button 5. STILL button 6. F.FWD button 7. P…