Unitech PA500 Programming Manual

29, - 8. Useful function call - without include SysIOAPI.DLL 8.1. Warm-boot, Cold-boot and power off #include <pkfuncs.h> #include "oemioctl.h" // Warn boot KernelIoControl(IOCTL_HAL_REBOOT, NULL, 0, NULL, 0, NULL); // Cold boot KernelIoControl(IOCTL_COLD_BOO…

7, - 7 2. USI.DLL – Unitech Scanner Interface DLL Note : For PA500 programming, it need to dynamically load DLL for using Unitech built-in DLL (Unitech will not provide *.H and *.LIB for compiler for mobile 5.0 OS), please refer to Chapter 7 for programming guide. 2.…

28, Unitech PA500 - 7. Dynamic Load DLL Compiler would not load the DLL while use dynamic load DLL, it help user to load the DLL if it exists while the application executed. The follow is the example. Note: Even user does not need include the header and lib file but need to know the function definiti…

5, - 5 1. Introduction 1.1 How to download data from scanner The major difference between the PA500 and a standard HPC/PalmPC is barcode input capability. The WinCE Reference Manual contains no information regarding barcode input. This section will introduce the programming structur…

20, - Supplement_five,S1.b2 is for Supplement_mh, S1.b3 is for Supplement_ssi. Supplement_two Esc,0,4,88,m,S1,BCC S1 is 0_off,1 on Supplement_five Esc,0,4,89,m,S1,BCC S1 is 0_off,1 on Supplement_mh Esc,0,4,8a,m,S1,BCC S1 is 0_transmit if present,1 must present Supplement_ssi Esc,…

26, - 6.2.5. Check Trigger key is pressing Function Description: This function is used to check if left or right trigger key is pressed or not. Function call: BOOL TriggerKeyStatus( int key); Parameter(Input) key: int: LEFT_TRIGGER_KEY : left trigger key RIGHT_TRIGGER…