SEH myUTN-50 Operation & User’s Manual

71, SEH myUTN-50 Working with the SEH UTN Manager myUTN User Manual 71 4. Follow the instructions of the Wizard. ª A UTN Action will be created. The UTN Action can be run by double-clicking the file. Fig. 12: Create UTN Action dialog Tip 1 After the saving, shortcuts (Windows) respectively apps (Mac) can…

142, Appendix - Additional Tool 'utnm' myUTN User Manual 142 The following commands are supported: Command Description c "command string" or command "command string" Runs a command. The command is specified in greater detail by the command string. The following command …

55, Device Settings myUTN User Manual 55 4.4 How to Assign a Name to a USB Device You can assign any name to the USB device. This gives you a better overview of the devices available in the network. Proceed as follows: 1. Start the myUTN Control Center. 2. Select DEVICE – USB port.…

123, Appendix - Parameter List myUTN User Manual 123 Table 24: Parameter List - SNMP dns_secondary [Secondary DNS server] valid IP address 0.0.0.0 Defines the IP address of the secondary DNS server. The secondary DNS server is used if the primary DNS server is not available. Parameters Valu…

77, Working with the SEH UTN Manager myUTN User Manual 77 2. Windows: Select Program – Options from the menu bar. Mac: Select SEH UTN Manager – Preferences from the menu bar. The Options dialog appears. 3. Select the Selection List tab. 4. Tick User selection list. 5. Click OK. ª Th…

79, Security myUTN User Manual 79 6 Security The following security mechanisms can be configured and activated according to your demands: What Information Do You Need? • ’How to Define the Encryption Level for SSL/TLS Connections’ Ö80 • ’How to Control Access to the myUTN Con…