Seiko LP-1020 Quick Reference Manual

22, 20 Cleaning the scanning area and scanner glass Note ◆ Never use volatile solvents such as thinner, benzine, and alcohol. Wipe the shading guide and scanner glass with a dry cloth. If extremely dirty, use the cloth dampened with water or neutral detergent diluted with water and then wrun…

15, 13 No. Name Function 6 [PROCESS] LED Indicates the process cartridge replacement time. On: Normal. Flashing: Replacement timing is approaching. Off: Process cartridge is not installed. [MANUAL FEED] LED Indicates whether the paper to be fed manually has been set. On: Paper has been set. Off: No pa…

20, 18 How to input an original ● How to input an original/Routine maintenance LP-1020-MF/LP-1020L-MF Adjust the position of the original width guide. Adjust the original width guide to the applicable line according to the original size. Note ◆ This device allows you to select whether…

5, Seiko LP-1020 Power on ● Turning the power on and off LP-1020/LP-1020L Turn on the Main power switch located at the lower-left as seen from the rear of the device. Press the power switch toward the ⎪ symbol (upwards). Main power switch PRI NT READY When turning the power off, confirm that the device is in the…

17, 15 ● Set Menu LP-1020-MF/LP-1020L-MF ◆Copy function overview Function list Description Original Size Sets the original size. Original Type Selects the image type according to the original. Background Removal Removes the background color. Density Adjusts the copy density. Scale Enlarges or reduc…

27, 25 3 Maintenance Attach a new waste toner bottle. 1Insert the mouth of the waste toner bottle onto the waste toner discharge port of the main unit by slightly lifting it. 2Set it onto the bottom surface and position it so that it is stable. After the following message appears, …