Seiko SLP100 Operation & User’s Manual

18, Chapter 2 Getting Started 2-6 Smart Label Printer Models 100, 200 and 240 Connecting the SLP to an IBM-compatible PC Use the USB or serial cable provided with the SLP 100/200/ 240 to connect the SLP to your computer. CAUTION: Connecting or disconnecting the interface cable while the printer is …

6, User Guide i About This Guide As you‘ll soon realize, the Smart Label Printer ® is easy to set up and use. Chances are, once you’ve read what you need to know in order to get going, you won’t have to use this guide except as a quick reminder or a reference. This guide will help …

32, Seiko SLP100 Appendix A Specifications User Guide A-3 Status Light Indicators * The number refers to the number of blinks. Life Time Model 100/200: Approx. 2 million characters (24 H x 12 W dots) Model 240: Approx. 5 million characters (24 H x 12 W dots) Environment Temperature Operati…

11, Chapter 1 Introduction 1-2 Smart Label Printer Models 100, 200 and 240 About Your Smart Label Printer The Smart Label Printer ® is the best way to instantly print one-at-a-time labels. Direct thermal printing technology does not use ink, toner or ribbon, just labels. The SLP produces f…

21, Chapter 2 Getting Started User Guide 2-9 6 Close the label cover. Testing the Printer A quick test lets you know your printer is operating properly and that the labels are loaded correctly. Here’s how to proceed: 1 Press and hold the power button for 2 seconds to turn the pri…

5, 4 Be sure to hold only the connector end of the power cord or interface cable when disconnecting. Repeated pulling on the cable could damage the cable. 5 If any of the following conditions occur, turn off the printer and unplug the power cord from the power outlet: ■ The power cord is …