Futrex Body Fat and fitness Analyzer -5500A/WL Operation & User’s Manual

32, 32 F5 & F6 - F.I.T. Value Settings You may utilize the F5 and F6 settings to customize how your FUTREX-5500A/WL asks the F.I.T. Value questions. The following table provides the F.I.T. settings for each configuration: * NOTE: If you select this configuration, you will be prompted by th…

1, USER ’ S MANUAL FUTREX ® -5500A/WL BODY FAT AND FITNESS ANALYZER FUTREX INC. 6 Montgomery Village Avenue Suite 620 Gaithersburg, MD 20879 Version 1.0 …

20, 20 Displaying the Date The FUTREX-5500AWL allows you to display the date on each printed test result. The default setting from the factory is to not display the date. If you wish to display the date, you must first activate that feature: 1) Switch the instrument “ON.” 2) Dur…

9, 9 4b) Press ENTER to start the body fat estimation sequence. 4c) Enter Weight in lbs. or kg. (refer to page 29 to switch between English and Metric Units). Press ENTER. 4d) Enter Height in inches or cm. 4e) Printer will show MEASURE BICEPS. Place Light Wand firmly on biceps of the dom…

39, Futrex Body Fat and fitness Analyzer -5500A/WL 39 Keypad Descriptions Summary: Key Name ZERO ADJUST : When the Display shows “Sd”, insert the probe firmly into the “Optical Standard”, and press this key to automatically calibrate the unit. SELECT PROGRAM: This key is pressed prior to the Program Keys in order to select one o…

36, 36 5) Printer Stops a) Low batteries. b) Bad battery contact. c) Bad AC connection. a) Replace batteries (see page 4). b) Remove batteries and clean tabs with isopropyl alcohol (rubbing alcohol). c) Unplug the AC Adapter from the wall socket and from the unit. Clean the adapter contact…