GAI-Tronics 1090 Installation And User Manual

6, GAI-Tronics 1090 6 VR & Help Point 3.3. Ending the Call There is no direct way for a user to end a call from the unit. The unit will close down and release the line on receipt of the following signals, usually when the remote party clears: • Line polarity reversal • A line break (some…

19, VR & Help Point 19 10. Technical Specifications Operational Requirements Systems. • Analogue Public Switched Telephone Network (PSTN) • Private Automatic Branch Exchange (PABX) Not suitable for connection to: • Payphone extensions • Public Emergency Teleph…

16, 16 VR & Help Point 7.2. Further programming options In addition to programming auto-dial numbers, several other features can be programmed using a tone-phone. 7.2.1 Time-out The call time out is factory set to 7 minutes, meaning that the phone will drop the call and go back on h…

2, 2 VR & Help Point CONTENTS 1. Safety and Care Information ....................................................................... 4 2. Product Description .................................................................................... 4 2.1. Changes from previous versi…

11, VR & Help Point 11 5.3. Flush mounting Note that it is the installer’s responsibility to prevent moisture coming into contact with the electronics and connections on the back of the faceplate.; To flush-mount the telephone to a wall: 1. Prepare a recess (at least 50mm deep) in …

18, 18 VR & Help Point 8. Cleaning Recommended cleaning methods are outlined below: 8.1. Normal Cleaning For normal cleaning we recommend "Virosol", manufactured by Clover products. Carefully follow manufacturer's instructions for storage, handling and use. 8.2…