GAS GAS TXT PRO - 2006 Operation & User’s Manual

45, - 43 - Technical characteristics FUNCTIONS Symbol TECHNICAL CHARACTERISTICS INCREMENTS PRECISION Bar Tachometer 500 - 11.000 rpm 500 rpm Digital Tachometer RPM 100 - 19.900 rpm 100 rpm Gear change indicator RPM 100 - 19.900 rpm 100 rpm Maximum Tachometer Value 100 -…

11, Recommendations for the good working of your GAS GAS. •Eight hours of running-in are recommended in order to guarantee the correct working of the engine. •It is important to warm the engine to the optimum working temperature every time the motorbike is used. •Synthetic or semi-…

46, ODO: Mileometer It shows the total mileage accumulated by the vehicle. The data is stored in the memory, even when the device is not running. RT: Time of use controller It calculates the total time in use since the last RESET operation. It starts counting from the moment that movement begins…

32, GAS GAS TXT PRO - 2006 Oil level 180 mm. 575 mm. Oil level 160 mm. 575 mm. FRONT FORK ø 40 mm. (125 / 200) Oil capacity inside the slider: 270 cc. FRONT FORK ø 40 mm. aluminium bars (250/280/300) Oil capacity inside the slider: 290 cc. -30- …

33, - 31 - The regulation is done by turning one screw (A) located in the axis of the suspension tube cap. The bleeder (B) is used to purge air that may be trapped inside the slider. C The front suspension is adjusted manually Right (hydraulic extension). Left (hydraulic compression). C A B 7 7 The leng…