Rane TTM 52 Operator's Manual

5, Rane TTM 52 Manual-5 MIC LEVEL to 0 when not in use. The OL indicator lights 6 dB before clipping. Adjust the MIC LEVEL so that the OL indicator flashes only when you shout into the microphone. MIC TREBLE and BASS controls provide as much as 8 dB of boost or 8 dB of cut. Response is flat wh…

6, Manual-6 Replacement Wear Parts Replacement Phono/Line switch assembly: ST 1 Replacement Fader Assembly: FT 45 All three faders use the same part. Follow steps A and C in the Fader Cleaning instructions to the right. Replacement assemblies available from your local Rane dealer. Figure 4. Phono/Li…

1, Manual-1 Quick Start Rane would like to thank you for se- lecting the TTM 52 Performance Mixer. The TTM 52 is one of the top performance mixers available. It features the same high quality components, reliability and perfor- mance as the Rane TTM 54 mixer with a reduced feature set …

4, Manual-4 Because the amplifier is capable of high current drive, it is important that the outputs are not shorted together or to ground. Do NOT use single cup phones that short tip and ring. MASTER LEVEL adjusts the MASTER OUTPUT level for both the balanced and unbalanced outputs.  POWER con…

2, Manual-2  PGM 1 and PGM 2 input GAIN TRIM controls are used to adjust input level. With the Program Faders (see ) at maximum, set controls to give a peak reading of +4 on the meter. Set the Master Level to minimum while adjusting). It is always best to run the input level at +4 …