Rane MP 2 Operator's Manual

1, Manual-1 OPERATORS MANUAL MP 2 CLUB MIXER QUICK START If you are too excited to read the manual, at least read this page to minimize any potential mistakes (we know you don't make any). Be sure your amplifier is off while making connections, and every time you turn on your system, appl…

2, Manual-2 FRONT PANEL DESCRIPTION 햲 MIC LEVEL control: Adjusts the Level of the MAIN MIC Input. 햳 MIC OL (overload) indicator: lights when the maximum mic level has been reached, 3 dB before clipping. If this lights up, either turn the MIC LEVEL down or stop yelling. 햴 Program INPU…

3, Rane MP 2 Manual-3 Fader Cleaning With heavy use in harsh environments, the faders may need lubrication. This treatment extends longevity and can make used faders as good as new. The fader assembly must be removed from the MP 2 for proper cleaning. We recommend any of the following cleaning soluti…

4, Manual-4 REAR PANEL DESCRIPTION IMPORTANT NOTE CHASSIS GROUNDING If your system exhibits excessive hum or buzzing, there is an incompatibility in the grounding configuration between units somewhere. Your mission, should you accept it, is to discover how your particular system wants to be…

5, Manual-5 햶 TAPE OUTPUT: These line level RCA Outputs are intended for use with a tape recorder, but not necessarily restricted to that purpose. You may be creative. These Outputs are not affected by the HOUSE LEVEL or AUX LEVEL controls. 햷 MIC to TAPE OUT switch: In the YES position…