Ratoc Systems CB32U Operation & User’s Manual

18, 15 Windows Me 2. Setup e. Double-click the CardBus controller name string to show the property window. If This device is working properly appears under the Device status, you can use the CB32U. 2. Grasp the CB32U by the edges with the label facing upward. Insert the CB32U into…

19, 16 Windows Me 2. Setup 3. When the Add New Hardware Wizard Window Appears a. When the Add New Hardware Wizard window appears, insert the CB32U floppy disk for Windows 98/95 and select the Automatic search for a better driver(Recommended) option. Click Next. b. When the fo…

36, Windows XP 33 2.Grasp the CB32U by the edges with the label facing upward. Insert the CB32U into the slot and push it in until it is firmly seated. If the CB32U can not be firmly seated, check to see if the PC Card slot supports CardBus PC Cards. If the following window as shown at step 3…

11, Ratoc Systems CB32U Windows95 8 2. Setup 2-1-3. Removing the CB32U When you want to remove the CB32U from the PC, you have to follow these steps through: 1. Click the PC Card icon on the Windows taskbar. 2. Select Stop SCSI CardBus PC Card REX CB32. 3. When the window saying You may safely remove this device …

21, 2. Setup 18 Windows NT4.0 2-4. Windows NT4.0 Setup Here’s how to get started with the CB32U and SCSI devices on Windows NT4.0: 1. Read the restrictions before you install the CB32U. 2. Install the CB32U driver. Refer to Chapter 2-4-1. 5. Confirm the installation. Refer to Chapter 2-4-2. 6. Rem…

68, 65 7. Linux Linux -wide_all=<on | off> To set enable/disable of Wide negotiation for all SCSI ID (for example) --disc_all=on : enable Wide negotiation with SCSI-ID 0-15 --disc_all=off : disable Wide negotiation with SCSI-ID 0-15 --wide<n&…