Digi-Frame Photo Scanner Operation & User’s Manual

18, Digi-Frame Photo Scanner 17 7. Troubleshooting If you have problems with the operation of the product, please check the following troubleshooting hints. 7.1 Frequently asked Questions Question: There are strange lines on the scanned image, or the image is not clear. Answer: Check the following: Are there sc…

9, 8 Plastic Sheaths Use the clear plastic sheath (included) when scanning photos to ensure the best scanning results. The sheath helps eliminate the possibility of de-focusing due to the uneven surface of curled photos. Curled photo Fuzzy areas that result from the unev…

8, 7 3.3 Scan an Original 1. Insert your photo into the plastic sheath supplied with scanner. (The detailed usage of the plastic sheath is described in the next page.) 2. With the side to be scanned facing upward and in correct orientation (bottom of photo against light/power button…

19, 18 Question: The scanner feels warm to the touch. Answer: It is normal for the scanner to emit a small amount of heat (around 30-45 Celsius) after prolonged use. However, if there are strange odors coming from the scanner or the scanner feels hot to the touch, disconnect the scanner imm…

17, 16 6.3 Cleaning the Image Sensor 1. Clean the scanner’s outer casing first, using only the recommended and supplied tools. 2. please turn the power off first then take the adaptor off, place the supplied senor cleaning tool on the feeding slot。 3. Put the cleani…

14, 13 7. Scan your photo described. After your scan, a folder titled Photo1 to save the scanned images is added to a default or specified location. Note each scanned image is given a file name with the prefix img followed by a 4-digit sequential number. For example, img0001.jpg, img00…