Digital Projection LIGHTNING 35HD Operation & User’s Manual

73, page 4.27 Digital Projection LIGHTNING 35HD User Manual 4. Using the menus Notes The eight buttons of the Main menu are always visible at the bottom of the display. To go back to a previous menu option that is no longer visible, call up the menu again using the appropriate Main menu button…

80, page 5.4 5. Maintenance Digital Projection LIGHTNING 35HD User Manual To change the lamp: • Press the LAMP button on the Main menu. • Press LAMP OFF and hold for 3 seconds. The lamp will ramp down to minimum and go off after a further 3 seconds. • Allow the lamp to cool for 5 minutes…

103, page 6.21 Digital Projection LIGHTNING 35HD User Manual 6. Appendix Lens Commands Lens Stop All Used to stop all lens motors. CALL : "lens,stop,write" RETURNS : "[msg id],ACK,stop" : OR : "[msg id],NAK,stop" Lens Move Used to move lens position left-right, up-do…

75, page 4.29 Digital Projection LIGHTNING 35HD User Manual 4. Using the menus Notes The eight buttons of the Main menu are always visible at the bottom of the display. To go back to a previous menu option that is no longer visible, call up the menu again using the appropriate Main menu but…

102, Digital Projection LIGHTNING 35HD page 6.20 6. Appendix Digital Projection LIGHTNING 35HD User Manual Picture Mute Used to set and query picture mute. CALL : "image,picmute,write,[mode]" : Where [mode] is one of "on" or "off" RETURNS : "[msg id],ACK,picmute,[mode]" : OR : "[msg…

26, page 2.10 2. Installation Digital Projection LIGHTNING 35HD User Manual 5:4 un-resized image Use the chart below to choose which lens best suits your application. if you need to be more precise, then use the calculations on page 5: 1280 x 1024 pixels Notes The lenses available and their part n…