Digital View RM-DN2 Operation & User’s Manual

18, Digital View RM-DN2 WARRANTY The products are warranted against defects in workmanship and material for a period of one (1) year from the date of purchase provided no modifications are made to it and it is operated under normal conditions and in compliance with the instruction manual. The warranty does not a…

10, J6 – Compact Flash card connector PIN SYMBOL DESCRIPTION 1 GND Ground 2 D3 Data bit 3 3 D4 Data bit 4 4 D5 Data bit 5 5 D6 Data bit 6 6 D7 Data bit 7 7 /CE1 Card enable 1 8 GND Ground 9 GND Ground 10 GND Ground 11 GND Ground 12 GND Ground 13 VCC +5V 14 GND Ground 15 GND Ground 16 GN…

19, CONTACT DETAILS ASIA: Digital View Ltd 19 th Floor, Tai Tung Building 8 Fleming Road Wanchai Hong Kong Tel: (852) 2861 3615 Fax: (852) 2520 2987 Sales: [email protected] Technical Support: [email protected] EUROPE: Digital View Ltd 36-38 Mortimer Street, London W1W 7RJ UK Tel: (44) (…

9, CNV2 - VGA output PIN SYMBOL DESCRIPTION 1 GND Ground 2 H_SYNC Horizontal Sync Output 3 V_SYNC Vertical Sync Output 4 B Analog Blue 5 G Analog Green 6 R Analog Red CNV3 - Reserved LED2 – Alternative power LED connector PIN SYMBOL DESCRIPTION 1 LED2 Connect to Anode of LED…

1, MV-Flash M3+ User Guide V2.1 This brief guide explains how to use and set up your MV-FLASH M3+ decoder board. It is intended for Digital View/RemoteMedia staff who assemble ViewStream product for demos or for customers, and for resellers of RemoteMedia equipment. 1 Introduction …