Red Hat P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade Installation Manual

1, Red Hat Linux 8.0 Professional Installation Guide for HP Servers (This document is only available in English.) November 13, 2002 Requirements Server: Red Hat 8.0 Professional is certified for use with HP Server tc2110, tc3100, tc4100, lp1000r [1.13/1.26/1.4 GHz] and lp2000r [1.13/1.26/…

2, Red Hat P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade Installing Red Hat Linux 8.0 Professional 1. Power on the server, and insert the Red Hat Linux 8.0 Professional Installation CD in the CD tray to start the installation. 2. The NOS will boot and display the boot prompt. Press Enter. If you would like to pick the order in which dri…

3, NOTE: Click on the other drives to deselect them. Additional Size Options: You will have the opportunity to choose the following additional options: - Fixed Size (MB) - Fill all space up to (MB) - Fill to maximum allowable size - Leave at fixed size - Force to be a primary parti…

4, C. Click OK. Click Next. 12. At the boot loader configuration screen, you need to accomplish the following tasks: -- Choose "change boot loader" to change to LILO or NO BOOT LOADER, otherwise, leave the default of GRUB. -- Verify that "Red Hat Linux" is selecte…

5, A. The first step is to select the video card. The installer should have already probed the card. Verify that the correct card was identified with the proper amount of RAM. Click Next. B. At the Monitor Configuration screen, select your Monitor. Entering wrong horizontal and/or ve…

6, 32. Enter the command: ifdown ethX NOTE: The X in ethX should be the number corresponding to the NIC you are working with. 33. Enter the command: rmmod eepro100 34. Enter the command: ifup ethX NOTE: The X in ethX should be the number corresponding to the NIC you are working w…