Navman Tracker500/500i Operation & User’s Manual

20, Tracker500/500i User Manual18 9.3 Fuel remaining change The fuel remaining value must be changed manually each time you change the amount of fuel in the tanks (e.g. filling, swapping or syphoning tanks). If it is not, this figure will be meaningless. 9.4 Fuel remaining low alarm You c…

40, Tracker500/500i User Manual38 Power Cable Connections 1. Connect the red wire to the positive supply (11-16.6 VDC) via a 1 amp fuse or 1 amp circuit breaker. Connect the cable shield to the negative supply. If possible, route the antenna and power cable away from other wiring on the boat.…

16, Navman Tracker500/500i Tracker500/500i User Manual14 8.0 Highway Screen This screen provides a graphic ‘highway’ that shows your movement relative to your desired course. The highway is drawn from your original start point to a selected destination point. In the Highway screen the destination is positioned at…

3, 1Tracker500/500i User Manual T500i/ENG/1F Contents 1.0 Tracker500/500i Introduction ................................................................... 3 1.1 The Global Positioning System (GPS) ................................................................ 3 1.2 Commonly Used Terms.......…

33, 31Tracker500/500i User Manual 14.0 Setup Select Setup from the Main Selection screen to access the Tracker500/500i setup functions. See section 5.0 for a detailed description of using the cursor keys to select menu items and changing data fields. On the Setup screen and its sub-screens,…