Rosen DA-7169 Owners & Installation Manual

8, Page 7 Typical Wiring Diagram The following is a typical wiring diagram for an In-Dash DA- 7169 connected to model DVA-310x and a radio receiver with a 40-Watt, 4-channel power amplifier. 2 Installing the DA-7169 Monitor …

15, Page 14 Selecting the Video Source • Press the SRCE button (#3) to choose between AV1 and AV2. Note: Refer to Choosing NTSC or PAL Display System on previous page. Note: The SRCE button activates TV (CH) mode when the monitor is connected to model DA-2301. Selecting the Audio Channel…

12, Rosen DA-7169 Page 11 Operating the In-Dash DA-7169 Color Display Monitor To take full advantage of the In-Dash DA-7169s features, read these operating instructions before using the monitor. Note: The color and brightness of the LCD display screen is factory preset. To adjust picture qualit…

10, Page 9 Remote Control Unit Frequently Used Buttons CHANNEL SELECT: Selects TV channels, disc title, or desired settings on the MENU screen. MODE: Selects the input video source. i.e. TV / AV1 / AV2. MENU: Displays menu screen of functions available. POWER: Open (ON) or close (OFF) the monitor enclos…

11, Page 10 Replacing the Battery 1 Use a small coin to remove battery container from the unit. 2 Remove old battery and insert new one. The positive sign (+) should face upward. 3 Insert battery container into unit until it is securely in place. Precautions 1 Properly dispose of used battery. 2 Overh…