Edirol PR-80 Owner's Manual

30, 30 Introduction to Use of the PR-80 6. Importing Materials This is done in the Edit Mode screen. You can import new materials. When you click the [Import] button at the lower right of the screen, the following dialog appears; you can then import materials from another pro…

112, 112 Practical Use of the PR-80 Automatically Starting Up Presenter 1. Click the [System Preferences] button in Selector. The System Preferences screen appears. 2. Select the “Boot up method” setting. • [Launch Presenter automatically] When you turn on the power to the P…

59, Edirol PR-80 59 Introduction to Use of the PR-80 Assigning Materials to Palettes Clips in the palette can be arranged in any order you like. You can assign materials to the clips. Select materials from the Materials list. This procedure is carried out in the Edit Mode screen (p. 37). fig.ed…

83, 83 Practical Use of the PR-80 Importing Masks Created on a Computer Using a network, you can import still pictures created on a computer into the PR-80 as masks (p. 56). You can make the setting for a mask for a single PR-80 unit. It isn't possible to make the setting on a…

73, 73 Practical Use of the PR-80 Specifying Clip Thumbnails You can specify the thumbnails for clips shown in the palette. 1. Drag the time slider with the mouse to the point where the image you want to specify as the thumbnail appears, then right-click. fig.clip02.eps When you select …

18, 18 Before Using the PR-80 Using the RS-232C Connector Connecting with the RS-232C cable allows you to control the PR-80 with a computer or other external control device. For more detailed information, refer to “Using the RS-232C Connector” (p. 105). fig.with.pc.eps Using …