Data: UPD 25th December 2023
Roland PDX-8 Drums, Musical Instrument PDF Settings Manual (Updated: Monday 25th of December 2023 12:06:46 PM)
Rating: 4.6 (rated by 33 users)
Compatible devices: V-Drums TD-1KPX, F-110, KR-15, Fantom G8, Atelier AT90, SRX-01, FP-80, PK-25A.
Recommended Documentation:
Text Version of Roland PDX-8 Drums, Musical Instrument Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 25 December 2023)
PDX-8 Trigger Parameter 1PS
Copyright © 2006 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any
form without the written permission of ROLAND CORPORATION.
for PDX-8 Owners
Set the trigger type and trigger parameters for the percussion sound module you are using.
Be sure to make these settings to ensure that the PDX-8 performs properly.
Below you will find the settings recommended for different percussion sound modules.
For instructions on setting the trigger parameters, refer to the Owner's Manual for your percussion
sound module.
* Leave the initial Cross Stick Cancel settings for each module unchanged.
About the Head Tension
Tighten the head so that the tension is rather firm.
Looseness in the head tension may result in problems such as failure of the PDX-8’s rim shots to
sound or double triggering.
About Rim Sens (*1)
If any of the following problems occurs, adjust Rim Sens to a value in the range indicated in the
column for the corresponding percussion sound module.
• If the rim sound plays even when you strike the head, lower the Rim Sens value.
• If no rim sound plays even when the rim is struck forcefully, increase the Rim Sens value.
* When using the TD-12 and TD-20, adjust the “RimShot Adjust.”
IMPORTANT: Only the snare input is capable of
producing a rim shot.
IMPORTANT: Only the 2(snare) input is capable of
producing a rim shot.
IMPORTANT: Only the inputs listed below are
capable of producing a rim shot.
TD-12
: 2 (SNARE), 3–5 (TOM1–3), 11–12 (AUX1–2)
TD-20
: 2 (SNARE), 3–6 (TOM1–4), 12–15 (AUX1–4)
Setting when connecting with trigger input 2(SNARE)
The PDX-8 does not support the TD-12’s and TD-20’s
positional sensing. Set the TD-12/TD-20 so that strike
position sensing is not activated. Set Snare CC to
“OFF.”
(press [SETUP], then [F1 (MIDI)], then [F3 (CTRL)])
Trigger Settings For Percussion Sound Module
TD-3 (Percussion Sound Module)
Trigger Type
()
80r
Scan Time ( )
1.0
Mask Time
()
8
Rim Sensitivity
()
10 (*1)
Rim Gain ( )
1.1
TD-6V (Percussion Sound Module)
TrigTyp
PD-80R
Mask Time
8ms
Rim Sens
11 (*1)
TD-12/TD-20
(Percussion Sound Module)
Trig Type
PD80R or PD85
Sensitivity
7
RimShot Adjust
1.8 (*1)
Recommended:
SureStep, TH43, V.Smile Smart Keyboard, Stylus CX4600
TD-07, MFB-503, SWT16, KPR-77, DD506, Ci
-
Original instructionsOriginalbetriebsanleitungNotice originaleIstruzioni originaliManual originalOorspronkelijke gebruiksaan-wijzingOriginal brugsanvisningOriginal bruksanvisningBruksanvisning i originalAlkuperäiset ohjeet Oriji ...
Model & Doc Type: M18 77
-
General The MFB-503 is a drum-computer that offers five editable instruments. Bass Drum, Snare Drum and Toms work fully analogue while Cymbal and Hihat each rely on two sampled waveforms. All instrument’s editable parameters are stored within a respective pattern. In addition, the MFB-503 offers ...
Model & Doc Type: MFB-503 2
-
Cat. No. / No de Cat.2817-20M18™ DRUM MACHINE FOR 3/8"-1/2" CABLES MACHINE À TAMBOUR M18™ POUR DES CÂBLES DE 9,5 mm À 12,7 mm (3/8"-1/2") MÁQUINA DE TAMBOR M18™ PARA CABLES DE 9,5 mm A 12,7 mm (3/8"-1/2") WARNING To reduce the risk of injury, user must read ...
Model & Doc Type: M18 2817-20 24
-
DP-101 Dial Pad Guide ...
Model & Doc Type: DP-101 6
Operating Impressions, Questions and Answers:
