Packard Bell EasyNote W Series Disassembly Manual

7, Packard Bell EasyNote W Series Packard Bell EasyNote L Disassembly Manual 6 1. Release the keyboard cover from the rear of the notebook. Fig. 6 Releasing the keyboard cover. 2. Open the notebook and tilt the LCD module entirely backward. 3. Carefully remove the keyboard cover. Fig. 7 Lifting the keyboard. 4. Pull …

13, Packard Bell EasyNote L Disassembly Manual 12 Fig. 23 Location top cover screws. 4. Disconnect the touchpad connector and remove the flat cable (same principle as described in Fig 9 ). Fig. 24 Disconnecting the touchpad cable. 5. Carefully lift the top cover. Removing the Touchp…

6, Packard Bell EasyNote L Disassembly Manual 5 Fig. 3 Releasing the memory side locks. iii. Pull out the memory module from its slot. Removing the Hard Disk Drive To remove the hard disk drive, first remove the battery (see Removing the Battery ), then perform the following steps: 1. Remov…

10, Packard Bell EasyNote L Disassembly Manual 9 5. Carefully lift the LCD module away from the unit. Removing the LCD Panel To remove the LCD panel, first remove the LCD module (see Removing the LCD Module), then perform the following steps: 1. Use a pin to remove the rubber covers on the LCD…

14, Packard Bell EasyNote L Disassembly Manual 13 Fig. 25 Location touchpad screws. 2. Carefully separate the touchpad module from the top cover. Removing the Chipset Heat Sink To remove the chipset heat sink, first remove the top cover (see Removing the Top Cover ), then perform the follo…

4, 3 Packard Bell EasyNote L Disassembly Manual Hazardous Voltage There is hazardous voltage present inside the computer when it is connected to an AC supply, even when the computer’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury,…