Packard Bell EasyNote B3 Disassembly Manual

14, 13 3. Gently lift out the LCD panel. 4. Remove the remaining 2 screws on each side of the LCD panel to remove the brackets. Wireless Antenna To remove the wireless antenna, perform the following steps: 1. After removing the LCD panel, remove the tape holding the antenna. 2. Remove the s…

9, 8 Picture 10. Right Speaker Connector LCD Screen Assembly To remove the LCD screen assembly, perform the following steps: 1. Remove the keyboard top cover as described in the chapter Keyboard . 2. Remove the LCD hinge covers; these are ‘clicked’ in place on the backside of the notebook. The …

4, Packard Bell EasyNote B3 3 Packard Bell EasyNote B3 Disassembly Manual Hazardous Voltage There is hazardous voltage present inside the computer when it is connected to an AC supply, even when the computer’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, cont…

8, 7 Picture 7. Keyboard Flat Cable Speakers To remove the speakers, perform the following steps: 1. Remove the keyboard cover as described in the chapter Keyboard . 2. Disconnect the speaker cables as shown in Picture 8, Picture 9, and Picture 10. 3. Remove the screws securing the sp…

5, 4 Packard Bell EasyNote B3 Disassembly Manual System Disassembly HDD To remove the HDD, perform the following steps: 1. Remove the HDD cover (2 screws marked A on Picture 1 ). 2. Remove the 2 screws holding the HDD bracket. 3. Pull back the HDD bracket and gently lift out the HDD. 4. …