Packard Bell EasyNote C3 Disassembly Manual

9, Packard Bell EasyNote C3 Disassembly Manual 9 Removing the Optical Disk Drive To remove the ODD, first remove the battery (see Removing the Battery) and remove the keyboard (see Removing the Keyboard) then perform the following steps: 1. Remove the screws retaining the optical disk dri…

16, Packard Bell EasyNote C3 Disassembly Manual 16 2. Release all screws on the top cover as shown in Fig. 23 Fig. 23 Top Cover screws 3. Disconnect the Touch Pad Connector as shown in Fig. 24 Fig…

22, Packard Bell EasyNote C3 Disassembly Manual 22 Notice The information in this guide is subject to change without notice. This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form or by any means without prior writte…

11, Packard Bell EasyNote C3 Disassembly Manual 11 4. Open up the LCD lid, release the screws and the LCD cable connector. Fig. 14 Removing the screws retaining the LCD Cable Connector 5. Carefully lift up the LCD Module. M2…

4, Packard Bell EasyNote C3 Packard Bell EasyNote C3 Disassembly Manual 4 Hazardous Voltage There is hazardous voltage present inside the computer when it is connected to an AC supply, even when the computer’s power switch is off. Exposure to hazardous voltage could cause personal injury. To avoid risk of in…