Packard Bell EasyNote MT Disassembly Manual

5, 44444 Packard Bell EasyNote MT Disassembly Manual 4 Battery Perform the following steps to remove the battery: 1. Make sure the power is off. 2. Turn the notebook upside down. Note: Use an anti-static mat or something soft like a piece of cloth underneath the notebook to prevent da…

14, 1313131313 Packard Bell EasyNote MT Disassembly Manual 13 3. Remove the screws (three in each side) securing the hinges. Fig. 19 Location LCD hinge screws. Note: In Fig. 19, some of the screws are partly covered by adhesive tape and/or cables. 4. Lift out the LCD assembly. Speakers To…

11, 1010101010 Packard Bell EasyNote MT Disassembly Manual 10 1. Remove the nine screws securing the keyboard cover. Note that four screws are located in the battery compartment. Fig. 13 Location keyboard cover screws. 2. Turn the notebook over so the top is facing up and open the LCD co…

22, 2121212121 Packard Bell EasyNote MT Disassembly Manual 21 7. Turn the screw in the CPU into the unlock position to release the CPU. Fig. 34 Location of screw securing CPU. 8. Carefully take out the CPU from the socket. I/O and HDMI Board To remove the I/O and HDMI board, first remove the main b…

15, 1414141414 Packard Bell EasyNote MT Disassembly Manual 14 3. Disconnect the speaker cables from the header on the main board. Fig. 21 Location of speaker cable header on the main board. Note: The left and right speaker assembly share the same header on the main board. 4. Remove the speaker…

8, Packard Bell EasyNote MT 77777 Packard Bell EasyNote MT Disassembly Manual 7 1. Remove the screw securing the optical disk drive. Fig. 7 Location screw securing optical disk drive. 2. Use the emergency eject hole to open the optical disk drive. 3. Pull the tray and take out the optical disk drive from the d…