Packard Bell EasyNote SB Series Disassembly Manual

11, EasyNote SB Disassembly Manual 11 TV-Card 1. Remove the battery. 2. Remove the screws of the cover on the bottom base (see Fig 13). Note: the screws stay attached to the cover. 3. Lift the door out. 4. The TV-Card is located to left. Remove the screws securing the card and lift it up. F…

9, EasyNote SB Disassembly Manual 9 4. The memory module(s) are located in the left of the compartment. To release the modules, push the metal clips aside. This will release the module. Fig. 12 Removing the memory modules. 5. Lift the memory module out. Note: In case you have 2 me…

15, EasyNote SB Disassembly Manual 15 Fig. 21 The LCD panel. 4. Remove the LCD bezel; it is clicked in place. 5. Disconnect both cables from the inverterboard, and the cable connected to the webcam. 6. Lift out the LCD panel. 7. Remove the 6 screws (3 at each side) to remove the LCD brackets. Fig. 22…

8, Packard Bell EasyNote SB Series EasyNote SB Disassembly Manual 8 Fig. 9 The optical drive brackets. 5. Remove the bezel: push the 2 clips to push the bezel loose Fig. 10 Removing the optical drive bezel. Memory Modules 1. Remove the battery. 2. Remove the screws for the large cover on the bottom of the unit. F…

12, EasyNote SB Disassembly Manual 12 Fig. 16 The heatsink. 8. Lift out the heatsink. 9. Turn the screw in the CPU socket 180 degrees. 10. Lift the CPU out. Note: The socket used on the EasyNote MB65, MB66, MB85 and MB86 resembles the CPU socket used for older Celeron M, Pentium M, Core Duo and…