Sitecom Wireless Router Operation & User’s Manual

18, Sitecom Wireless Router 3-2 password , the default password (“password”) will still be used as the default. You need to change it to the correct password before you will be let in. No matter what password you use, each character will always be displayed in the logon prompt as a “*”. If you forget the password, y…

75, 5-3 How to Save or Clear Configuration Changes Every 30 minutes, the Wireless Router looks for configuration changes that have been made and save them into the router’s permanent memory. You can use the Configuration Data Options features to manually save changes or clear the configuration (…

16, 2-4 Connecting more Devices through a Hub to the Wireless Router The Wireless Router provides four LAN ports to allow up to four PCs or Workstations to be connected to it directly. If you want to connect more devices, you can connect an external hub or switch to LAN port 1 using a straight LAN…

60, 4-16 in the rule table followed by clicking the Edit button. Step 4 In case of adding a new selection rule, the following screen shows: Step 5 Enter the following information: Rule No.: a number used for identification purposes. Rule Name: a name by which you will refer to this rule. Inter…

27, 3-11 Note: When you click APPLY and TEST, the Wireless Router attempts to place a call to your Internet Service Provider. Watch the Message Window for any messages. If the test is successful, your users will be ready to access the Internet. If not, the Wireless Router will try to give…