General Instrument DSR-4810 Operation & User’s Manual

2, IRD User Guide i Foreword This document is intended for use by those affiliates, business partners, and clients of CBS/UPN who will use the General Instrument DSR-4800 series IRD as a standalone digital satellite receiver to acquire the CBS or UPN programming appropriate to the respective business …

7, General Instrument DSR-4810 IRD User Guide 4 7. Press the Save key to save the new setting to the IRD’s database. If the Save key is not pressed within 10 seconds, the new setting will automatically be saved in the IRD’s database. To revert to the prior settings, simply press the Status key and the previous settings…

3, IRD User Guide ii Table of Contents Virtual Channels, Virtual Channel Tables, & Virtual Channel Maps .................................................... 1 MPEG Service/Program Number .........................................................................................................…

16, IRD User Guide 13 2. Using the Edit knob and Save key, set the “AUD data field to “1/2. The subsequent displayed data fields will now pertain to Audio Channels 1 and 2. AUDIO FORMAT • A nine character data field displaying the Dolby AC3 audio coding mode according to Table 8 below: If …

9, IRD User Guide 6 • TONE (22kHz) = OFF • L.O. (Local Oscillator) = 5150 10. Repeat Steps 4 through 9 above for “ANT #2”, “ANT #3”, & “ANT #4 parameters with the settings listed in Table 6 below: 11. Press the Prog key until the top line of the display screen should read “…

20, IRD User Guide 17 3. Using the Edit knob and Save key, set the “Signal” alarm threshold level to “-60dB”. Eb/No (Configurable) • Allows the user to set the alarm threshold level for the Eb/No signal level. The alarm threshold can be set from 3.0 to 20dB. 4. Using the Edit knob …