Ecoair ECO906SQ Installation And Operation Manual

37, Ecoair ECO906SQ ONE (1) YEAR LIMITED WARRANTY SAVE THIS WARRANTY INFORMATION EcoAir guarantees this product free from defects in materials and workmanship for a period of one (1) year from the date of purchase, limited to parts only. Faults arising from a faulty installation is specifically exclu…

21,   Select a position where the condensing water can be easily drained out, and the place is easily connected for outdoor unit. Can select the place where is strong enough to withstand the full weight and vibration of the unit. And will not increase the noise.    �…

24,  Ready for the following tools: Electric SDS drill. (If you use an ordinary drill you will need an SDS adaptor) Screwdrivers. Posidrive or crosshead Prepare hole cutter Number 14 (7mm) masonary drill 1.5 inch number 10 screws. roundhead slotted 7mm wallplugs Pipe and cable detector Ha…

26,  1. Check the area for any hidden wires or pipes. 2. Mark the righthand backplate screw position. 3. Remove the backplate and drill a 7mm hole. 4. Tap home a 7mm wallplug. 5. Screw the backplate to the wall using 1.5 inch number 10 screws. 6…

5, ȝ ȝ ȝ Operation and maintenance-notices for operation  ȝ ȝ Be sure to pull out the power ȝ ȝ ȝ ȝ Earth: The ground be connected! If not, please ask the qualified person- nel to install. Furthermore, don't conn- ect each wire to the gas pipe, water pipe, drainage …