GHP Group RMC-KFA400TDGD User's Manual And Operating Instructions

9, 8 NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! 8. LONG TERM STORAGE OF YOUR HEATER 1. Remove fuel drain bolt from rear bottom side of fuel tank using 3/4” socket or adjustable wrench and drain. 2. Using a small amount of kerosene, swirl and rinse the inside of the tank. NEVER m…

17, 16 NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! 12. SPECIFICATIONS LEDOM 000,004rH/UTB Fuel Consumption-Gal./ ( ./Hr) 3.0(11.36) Fuel Tank Capacity-Gal ( ) 29.0(110.0) Pump Pressure PSI (kgf/ ) 125(8.79) 4.4/06/CAV021spmA/zH/stloV 1esahP Size(D W H), Inch( ) 52.5” × 31.4” × 32.8” (1…

11, C.) SPARK PLUG CLEAN AND REGAP EVERY 600 HOURS OPERATION OR REPLACE AS NEEDED. - Remove upper shell (See page 9). - Remove spark plug wire from spark plug (See Figure 9) - Remove spark plug from burner head using medium phillips screw driver. - Clean and regap spark plug electrodes to 0.14”…

7, 6 NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! 7. OPERATION B.) OPERATION TO START HEATER 1. Fill fuel tank with kerosene or No. 1 fuel oil. 2. Attach fuel cap. 3. Plug power cord of heater into three-prong, grounded extension cord. Extension cord must be at least six feet long. Extensi…

3, GHP Group RMC-KFA400TDGD Figure 1. RMC-KFA400TDGD MODEL NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! ITEM PAGE # 1EDIUG YTEFAS - SNOITUACERP 2NOITCUDORTNI.1 2SERUTAEF.2 3YLBMESSA DNA GNIKCAPNU.3 4)LIOLEUF 1 .ON RO K-1( ENESOREK.4 5NGISED RETAEH FO WEIVREVO.5 5RETAEH RUOY GNILEUF.6 6NOITAREPO.7 8RETAEH R…

20, 19 NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! 14. PARTS LIST (BURNER HEAD ASSEMBLY & MOTOR AND PUMP ASSEMBLY) NOTE: SPECIFY MODEL NUMBER AND PART NUMBER WHEN DRDERING PARTS. KEY NO. DESCRIPTION PART NO. 1 Burner Head 3531-0012-00 2 Plug 3541-0060-00 3 Nozzle SP-KFA1024 4 Sp…