Solar 40220 Manual, Assembly & Operating Instructions

2, Carefully remove and identify all the parts from their protective packaging and lay them out in front of you. Included Parts: 4 screws and anchors / for mounting solar panel 15 foot power cable Light cover Motion sensor Solar panel angle pivot Solar panel mounting bracket AUTO/OFF switch…

3, Solar 40220 CHOOSING A LOCATION FOR YOUR SOLAR SECURITY LIGHT This Solar Security Light comes complete with a solar cell charge panel attached to a 15 foot power cord. For optimum sun exposure and longer light output, place the solar panel, when attached to the Security Light, in a position that receive…

6, NOTE: Do not dispose of battery in general household trash or into a fire since the battery may explode. Consult your local regulations for correct disposal of batteries. The battery may also be returned to MAXSA Innovations at 8412 Cathedral Forest Dr., Fairfax Station, VA 22039.…

7, TROUBLESHOOTING Problem Possible Solutions Light will not switch • Ensure that the power switch on the main body has been turned to on when there is the AUTO position. movement in the • Ensure that the motion sensor has been positioned to face detection area. oncoming movement. • Ensure tha…

5, IF YOU WANT TO TEST THE COVERAGE Point the motion sensor in the direction you want to detect motion and set the TIME dial to minimum (-) position and the LUX dial to "light" (~) position. Test the coverage of the area by walking slowly around the area of detection and adjust sensitivity i…