Sonnet Fusion RAID Storage Systems Operation Manual

39, Sonnet Fusion RAID Storage Systems v Appendix A - CLI ASCII-Based Interface Command Default Example RGUnmap rgunmap g1 RGWaitTimeout 5 rgwaittimeout 30 RMState set rmstate g1 online RMStatus rmstatus g1 Route route host 1 raid alpha1 6 RouteDisplay routedisplay 03 124 SASTargets sastargets SaveConfiguration saveconfigur…

40, vi Appendix A - CLI ASCII-Based Interface CLI Command Explanations Command line interface commands are listed alphabetically with explanations of what they are used for, their defaults and syntax. • AutoMap Maps RAID groups created with the Configuration Tool to the operating syste…

22, 18 Individual Drive Identification (continued) 4. Select RAID Management > Locate > Drive from the application menu. If the drive does not support this method of identification, a message will appear in the bottom pane; go to the next step. Otherwise, look at the Fusion enclosure; the …

21, 17 1.3 Drive and RAID Group Monitoring The ATTO Configuration Tool provides information on individual drives and RAID groups. Use the ATTO Configuration Tool to gather basic or detailed information about the drives connected to the Sonnet RAID controller, and operational status on the …

15, 11 Mac OS Drive Formatting 1. Depending on how you configure your setup, a Disk Insertion window stating that there is an unreadable volume will appear at some point during the RAID group creation process; click Initialize, and then Disk Utility will open. 2. In the Disk Utility window, …

48, Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases. Software updates and links are available from the Sonnet web site at www.sonnettech.com. • Online support form available at http://supportform.so…