Vertical Xcelerator IP IP2007 Manual 

3, Vertical Xcelerator IP IP2007 3 of 7 July 2007 Click OK, then scroll down the page again and click Reboot. You will see the following screen This screen advises you to “Close the Xcelerator IP configuration window and wait 2 min. bef…

4, 4 of 7 July 2007 This page allows you to configure the Authentication for SIP Clients (stations). Here we can enter the extension numbers and the password used for Authentication. To simplify the process, we are goi…

2, 2 of 7 July 2007 The default LAN IP address is 192.168.1.1 with a subnet mask of 255.255.255.0 (/24). Change the default IP address to the one given to you by the IT Dept (192.168.10.200 /24) to confi…

5, 5 of 7 July 2007 When all extensions and passwords have been entered scroll to the bottom of the page and click “Save Settings” We can now start configuration of the IP2007 phones. Plug the IP2007 phones …

1, 1 of 7 July 2007 Application Note – LAN Configuration Scenarios – IP Addressing Xcelerator IP 07008 This Application Note covers two scenarios for applying IP addresses to Xcelerator IP and IP2007 phone…

6, 6 of 7 July 2007 Across the top of the screen towards the left you will see a tab called SIP, click on it and you will get to the next screen. Here is where we tell the phone where the SIP Server is (Xcel…